DECKED Drawer System Dimensions: Ford F150 & Toyota Tundra

Knowing the exact dimensions of a DECKED drawer system before you buy is the difference between a clean install and a wasted afternoon. Bed length varies by make, model, and year , and DECKED engineers each system to those specific measurements, not as a universal fit. If you’re building out a truck for the field, the Drawer Systems & Vehicle Storage hub is the right starting point for understanding how these systems compare across platforms.

The products covered here span two of the most common DECKED platforms , Ford F150 and Toyota Tundra , along with drawer lock accessories for buyers who need security beyond the standard latches. Fit, weight, and installation complexity are the variables that matter most.


What to Look For in a Truck Bed Drawer System

Bed Length and Fitment Precision

DECKED builds each system to match a specific bed length and truck generation. That’s not marketing language , it’s how the geometry works. A system rated for a 5’7” Tundra bed will not sit flush in a 5’5” bed, and the structural load points won’t align correctly. Before anything else, confirm your bed length with a tape measure, not the window sticker. Manufacturers round differently.

Year range matters equally. DECKED distinguishes between 2007, 2021 Tundra and 2022-current Tundra because Toyota changed the bed structure between generations. The same logic applies to F150. If your truck sits at the edge of a listed range, verify the cab and bed configuration , SuperCrew, SuperCab, and Regular Cab variants sometimes differ even within the same model year.

Drawer Interior Dimensions and Load Capacity

Each DECKED system provides two drawers that run the full width of the bed. The standard drawer opening is roughly 50 inches wide and around 13 inches tall, with depth varying by platform. That opening dictates what gear actually fits , a Pelican 1510 slides in; a full-size cooler does not. Published load ratings per drawer run around 200 lbs dynamic (moving vehicle) and higher for static loads, but confirm the specific number for your platform before loading recovery gear and tools.

The platform deck above the drawers is the other dimension worth tracking. DECKED’s deck surface is rated to support the full payload of the truck, so you can load lumber or sheet goods above the drawers without compromising the system. That dual-use design is the core value proposition , usable drawer storage without sacrificing bed capacity above.

System Weight and Payload Impact

DECKED systems weigh between 150 and 200 lbs depending on the platform. That weight counts against your truck’s payload rating, which is already a finite number for most half-ton trucks. For occasional camping and overland travel, the payload tradeoff is usually manageable. For contractors running max-payload configurations, it requires a deliberate calculation before purchase.

The weight is mostly structural , the HDPE plastic shell and the aluminum extrusion frame are what make the system durable enough to stand on. You’re not carrying that weight for no reason. But it’s worth running the numbers, particularly if you’re already carrying a rooftop tent, a rear bumper, and a full drawer load of gear.

Security and Lock Options

Standard DECKED latches hold the drawers closed reliably under road vibration but are not keyed. For buyers who store tools, firearms, or recovery gear in the bed, aftermarket drawer locks address that gap directly. The full range of vehicle storage options includes several security-focused accessories worth reviewing before finalizing your setup.

Lock compatibility varies , not every aftermarket lock works with every drawer design. Confirm the latch type on your specific DECKED system before ordering locks.

Top Picks

DECKED Truck Bed Storage System Includes System Accessories, Compatible with Ford F150 (2004-2014) 5’6”

The DECKED Truck Bed Storage System for Ford F150 (2004-2014) 5’6” is the established platform for one of the most common truck configurations in the overlanding community. The 5’6” bed on a SuperCrew F150 is a constrained space , not short enough to feel limiting, not long enough to be cavalier about organization. DECKED’s system fills that bed with a purpose-built solution rather than a compromised one.

The drawer dimensions on this platform give you roughly 49 inches of interior width and 13 inches of clearance height , enough for most tool bags, recovery kits, and overlanding bins. The system ships with accessories that expand organization without requiring a separate order. Based on owner reports, installation runs three to five hours solo and benefits from a second set of hands for the initial placement. The system is heavy, and positioning it correctly in the bed before fastening saves significant rework.

The 2004, 2014 F150 range covers the 12th and 13th generation trucks, both of which share compatible bed geometry on the 5’6” variant. If you’re running a 2015 or newer F150, this is not your system , DECKED’s fitment database is the authoritative source for confirming compatibility before purchase.

Check current price on Amazon.

DECKED Truck Bed Storage System with System Accessories | Compatible with Toyota Tundra (2007-2021) 5’7”

The DECKED system for Toyota Tundra (2007-2021) 5’7” covers first and second generation Tundras across a fourteen-year production span. The 5’7” bed is the Tundra’s standard configuration for Double Cab variants, and DECKED engineered this system to the specific floor contours and bed rail geometry of that generation , which is why fitment works cleanly rather than requiring shimming or adaptation.

The drawer interior on this platform is slightly wider than the F150 variant, reflecting the Tundra bed’s dimensions. Owner reviews consistently note that the platform deck handles overloading without flexing , several report running full loads of lumber or gear on top while the drawers remain operational below. That real-world verification matters more than manufacturer load ratings for practical purposes.

The 2007, 2021 range ends before Toyota’s third-generation Tundra redesign. If you’re running a 2022 or newer Tundra, the bed structure changed enough that DECKED built a separate system , covered next. The 2021 and earlier buyers have a well-documented platform with years of community field reports to draw from.

Check current price on Amazon.

DECKED Truck Bed Storage System with System Accessories | Compatible with Toyota Tundra (2022-current) 5’5”

Toyota’s third-generation Tundra arrived for 2022 with a redesigned bed structure and a slightly shorter standard bed , 5’5” versus the 5’7” of the outgoing platform. The DECKED system for Toyota Tundra (2022-current) 5’5” was built around that new geometry, not adapted from the previous generation. That distinction matters for buyers who’ve read reviews of the older Tundra system and are trying to extrapolate dimensions to their newer truck.

The 5’5” bed is a tighter footprint. DECKED’s drawer interior on this platform reflects that , slightly less depth than the 2007, 2021 variant. For most overlanding and work configurations, that difference is manageable with intentional packing. The system still ships with accessories and carries the same deck load rating as the rest of the DECKED lineup.

Installation reports for 2022+ Tundra owners are more recent and therefore thinner than the F150 or first-gen Tundra corpus. What’s consistent: the fit-out process is similar to other DECKED installs, and the truck-specific engineering means no improvised solutions to make the system sit level. New Tundra owners running MaxTow or higher payload configurations should verify payload margin before committing, as the 2022 Tundra’s frame and rated capacity differ from the outgoing V8 platform.

Check current price on Amazon.

Drawer System Locks - 2-Pack

The standard DECKED latch system keeps drawers closed on rough roads but does not lock. For buyers whose bed carries tools, medical kits, or anything worth protecting, the Drawer System Locks 2-Pack covers both drawers with a basic keyed solution.

The build quality concern here is real , this is an unbranded product, and the confidence level is lower than it would be on a DECKED-native accessory. That said, the use case for a 2-pack is straightforward: two drawers, two locks, basic deterrence. For buyers whose primary concern is preventing casual access rather than defeating a determined attempt, it serves the purpose.

Confirm latch compatibility before ordering. The 2-pack is not a universal solution , it needs to match your specific drawer latch geometry. Check the product listing dimensions and compare to your DECKED system’s latch hardware before adding to cart.

Check current price on Amazon.

Drawer System Locks - 6-Pack

The Drawer System Locks 6-Pack addresses a different buyer: someone running multiple storage drawers across a more complex build, or someone who wants spares on hand for a vehicle that sees high-frequency access. Six locks is more than a standard two-drawer DECKED system requires , the extra units cover additional storage components or provide replacements if locks are lost or damaged.

The same brand-confidence caveat applies here as with the 2-pack. Unknown-brand hardware on a security application is a real limitation. The 6-pack makes sense as a volume solution for a fleet context or a build with multiple drawer units , not as a premium security upgrade for a single system.

The value calculation shifts favorably at higher quantity. For buyers who need coverage across several compartments, sourcing individual locks adds up. The 6-pack consolidates that purchase in one order, with the understanding that build quality is the tradeoff.

Check current price on Amazon.


Buying Guide

Confirming Your Bed Length Before You Order

DECKED’s fitment precision is the system’s strength and its primary purchase risk. Measuring your bed is a five-minute step that eliminates the most common return scenario. Measure from the inside of the bulkhead to the inside of the tailgate with the tailgate closed, at floor level. Don’t rely on the manufacturer’s published bed length , production tolerances and liner thickness affect the actual interior dimension. A half-inch discrepancy at the wrong location can prevent proper seating of the system.

If your truck is a fleet or rental with aftermarket modifications, verify that no previous owner has installed a spray-in liner that changes the bed floor profile. DECKED accounts for factory liner thickness but not all aftermarket applications.

Payload Math for Half-Ton Trucks

A DECKED system weighing 150, 200 lbs represents a meaningful fraction of a typical half-ton’s payload rating. Most F150 and Tundra configurations have a published payload somewhere between 1,400 and 2,000 lbs depending on cab, bed, and powertrain configuration , find the exact number on the sticker inside your driver’s door jamb, not a website estimate. Subtract the system weight, then account for everything else you load: fuel, passengers, gear, recovery equipment. Owners who run rooftop tents and full drawer loads regularly operate near their payload ceiling without knowing it.

Installation Logistics

Solo installation is possible but not ideal. The system is heavy enough that two people makes the initial placement significantly safer. Most owner reports describe a half-day installation with basic hand tools , no drilling required for most platforms. Clearing the bed completely before starting, having a clean work surface, and following the platform-specific instructions (not generic video walkthroughs) are the consistent recommendations from the community. For buyers without mechanical comfort, dealer installation is available from some DECKED retail partners.

Choosing the Right Lock Configuration

Two drawers means two locks , the 2-pack is the minimum viable security addition. The 6-pack makes sense only if you’re running accessories beyond the standard two drawers, stocking spares, or building out multiple vehicles. Security needs vary by use case: a contractor’s tool kit warrants more deliberate locking than a camping gear drawer that carries sleeping pads and camp kitchen supplies. Consider what you’re actually protecting before adding hardware. The full vehicle storage category includes additional accessory options that pair well with the DECKED platform for buyers building more complete systems.

Accessories Included vs. Aftermarket Add-Ons

The “with System Accessories” designation in the DECKED product names is specific , these kits include dividers, D-rings, and mounting points that expand drawer organization beyond the basic shell. Verifying exactly what is included in each kit matters before assuming you have everything needed for your intended use. Aftermarket additions , cargo nets, drawer organizers, lockboxes , exist across the DECKED ecosystem and are worth researching once the base system is installed and you understand what the drawers actually hold for your specific gear load.


Frequently Asked Questions

What are the interior drawer dimensions on a DECKED system for a standard 5’6” truck bed?

DECKED drawer interior dimensions vary by platform but typically run approximately 49, 50 inches wide, 13 inches tall, and 13, 14 inches deep for a 5’6” bed configuration. These are usable interior measurements , the openings are sized to accept standard gear bins and tool bags. Always verify the published spec sheet for your specific truck model and year, as platform-specific engineering produces minor dimensional variation between systems.

Will the DECKED system for the 2007, 2021 Tundra fit a 2022 or newer Tundra?

No. Toyota redesigned the Tundra bed structure for the 2022 model year, which is why DECKED built a separate, distinct system for the 2022-current platform. The older DECKED system for 2007, 2021 Tundra is not compatible with third-generation Tundra beds , the floor contours, rail geometry, and bed length all changed. Order the 2022-current system for any third-gen Tundra.

Do I need to drill into my truck bed to install a DECKED system?

Most DECKED platform installations do not require drilling. The system uses existing tie-down points and bed rails for structural attachment on compatible trucks. However, installation specifics vary by truck platform and model year. Reviewing the platform-specific installation documentation before purchase is the reliable way to confirm this for your exact configuration , generic answers based on other platforms may not apply.

How much does a DECKED system weigh, and does it affect my payload?

DECKED systems typically weigh between 150 and 200 lbs depending on the truck platform. That weight counts against your truck’s published payload rating, which you can find on the sticker inside your driver’s door jamb. For most half-ton overlanding setups, the payload tradeoff is manageable , but buyers running rooftop tents, rear bumpers, and full gear loads should run the actual numbers before purchasing rather than assuming margin exists.

Are the drawer lock 2-pack and 6-pack compatible with all DECKED systems?

Compatibility is not guaranteed across all DECKED generations and platforms , these are third-party lock products, not DECKED-native accessories. Confirm the latch geometry on your specific DECKED system matches the lock hardware before ordering. The 6-pack makes more sense for builds with multiple lockable compartments; the 2-pack covers a standard two-drawer configuration. When in doubt, contact the seller with your DECKED system’s model and year for compatibility confirmation.